We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300757
Description
Parts | Filter pressure regulator |
Condensate drain | semi-automatic, open without pressure |
Relieving exhaust | with relieving air exhaust |
filter porosity | 5 µm |
Pressure gauge | with pressure gauge |
Housing | Die cast zinc |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 1350 l/min |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0821300757, communicate with FAMAGA, the world's dominant distributor of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of products and private attention to each user. We admire everyone, who liased with us - thus, our regular customers accept the most beneficial purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 3500 such customers, and we constantly compose new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Central African Republic, Guyana, The Bahamas, Iran, Nicaragua, Qatar, South Sudan, New Zealand, Eritrea, Israel, Uganda, Benin, Haiti, Colombia, Norway, Fiji, Madagascar, Botswana, Zimbabwe, Grenada, Afghanistan, Netherlands, Oman, Argentina, Comoros, Brunei, Libya, Philippines, Yemen, East Timor, Egypt, Montenegro, Albania, South Korea, Bolivia, Russia, Jamaica, Mozambique, Belarus, Mexico, Nepal, Estonia, United Arab Emirates, Lithuania, Costa Rica, Thailand, Mauritius, Mongolia, The Gambia, Sudan. A advanced logistics link and a partnership network assist us to dispatch our elements anywhere in the earth quickly without undermining product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is growing every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To consult or make a request, phone us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | 1-part, Can be assembled into blocks |
Parts | Filter pressure regulator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 1,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air Neutral gases |
Nominal flow Qn | 1350 l/min |
Regulator type | Diaphragm-type pressure regulator |
Regulator function | with relieving air exhaust |
Adjustment range min./max. | 0,5 ... 10 bar |
Pressure supply | single |
Filter reservoir volume | 16 cm³ |
Filter element | exchangeable |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. Also suitable for separation of fluid oil or water due to the design. The rear pressure gauge connection on the pressure regulator is closed with a blanking plug, the front connection is open. Depending on the customer application, a second blanking plug may be necessary. Please order separately (see accessories). | |
Max. achievable compressed air class acc. to ISO 8573-1:2010 | 6 : 7 : - |
Material |
---|
Housing | Die cast zinc |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Filter insert | Polyethylene |