We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480605349
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 50 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480605349, catch up with FAMAGA, the world's key provider of machine made equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of goods and private attention to each client. We appreciate everyone, who collaborated with us - so, our regular customers pick up the most favorable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4000 such consumers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Bahamas, Vietnam, United Arab Emirates, Dominican Republic, Samoa, Togo, Slovenia, Malaysia, Uruguay, Netherlands, Romania, Indonesia, Uzbekistan, Angola, Palestine, Moldova, Tajikistan, Madagascar, El Salvador, Malta, Haiti, Qatar, Bulgaria, Mauritius, Eritrea, Sudan, Peru, Monaco, Antigua and Barbuda, Kuwait, Bosnia and Herzegovina, Comoros, Sweden, Guatemala, Djibouti, Serbia, Syria, Morocco, Cyprus, Costa Rica, Georgia, South Korea, Benin, Austria, Jamaica, Switzerland, Czech Republic, Estonia, Bolivia. A well-built logistics system and a partnership network let us to dispatch our elements anywhere in the globe as soon as possible without damaging product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only professionals, who already have experience in the range of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To request or make a request, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |