We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334505
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 100 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822334505, call FAMAGA, the world's dominant provider of industrial equipment. Our company has existed for more than ten years - these are ages of experience, which are described in the quality of merchandises and special attention to each consumer. We appreciate everyone, who cooperated with us - hence, our regular purchasers pick up the most convenient purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4500 such clients, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Slovenia, Bolivia, Switzerland, Bahamas, Botswana, China, Cyprus, Uganda, Monaco, Netherlands, Yemen, Liechtenstein, Georgia, Lebanon, Niger, Honduras, Brunei, The Gambia, Tonga, Tajikistan, Panama, Turkey, Haiti, Japan, Algeria, Finland, Guyana, Cameroon, Morocco, The Bahamas, Afghanistan, Syria, Mauritania, Cape Verde, Albania, Mauritius, Sweden, United Arab Emirates, Zimbabwe, Philippines, Mozambique, Ireland, Ghana, Croatia, Togo, Paraguay, Serbia, Djibouti. A well-developed logistics system and a partnership network cheer us to ship our items anywhere in the world with no delay without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is rising every day. We are happy that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or order, phone us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |