We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822082203
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 50 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822082203, call FAMAGA, the world's foremost company of industrialized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of items and particular attention to each orderer. We praise everyone, who engaged with us - therefore, our regular clients receive the most favorable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Albania, Bahamas, Macedonia, Benin, Oman, Botswana, Algeria, Azerbaijan, Antigua and Barbuda, Chad, Libya, Lithuania, Belgium, Uzbekistan, East Timor, Liechtenstein, Peru, North Korea, Angola, Rwanda, Comoros, Tanzania, Mongolia, Vietnam, Sierra Leone, Malta, Uruguay, Nicaragua, Czech Republic, Norway, Denmark, Chile, Armenia, Argentina, Ecuador, Uganda, Croatia, Paraguay, Egypt, Austria, Malaysia, Thailand, Madagascar. A well-shaped logistics link and a partnership network assist us to ship our units anywhere in the globe promptly without damaging product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. Warning: The front and rear piston rods must not be twisted against one another! |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |