We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822392208
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | NFE 49004 |
Stroke | 60 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822392208, make contact with FAMAGA, the world's influential vendor of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and personalseparate attention to each purchaser. We appreciate everyone, who joined with us - so, our regular clients procure the most desirable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4500 such customers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, United States, Oman, Mongolia, Belarus, Monaco, Mauritania, Bahamas, Tunisia, Andorra, Bulgaria, Brazil, Malawi, Burundi, Lebanon, Antigua and Barbuda, Benin, Japan, Norway, Malaysia, Kazakhstan, Brunei, India, Namibia, Cape Verde, Azerbaijan, Tanzania, Algeria, The Gambia, Montenegro, Armenia, Macedonia, Libya, Lithuania, Hungary, Cameroon, Sierra Leone, Vietnam, Senegal, Mozambique, Turkey, Switzerland, Uganda, Nepal. A advanced logistics connection and a partnership network assist us to conduct our units anywhere in the globe promptly without undermining product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or book, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |