We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412012465
Description
Standardization | ISO 15407-2 |
Accessory type | type C |
Frame size | 26 mm,ISO 1 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Die-cast aluminum |
Compressed air connection input | G 3/8 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412012465, catch up with FAMAGA, the world's the best company of streamlined equipment. Our company has functioned for more than ten years - these are cycles of experience, which are symbolized in the quality of merchandises and particular attention to each purchaser. We esteem everyone, who collaborated with us - therefore, our regular purchasers procure the most flexible purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Brazil, Albania, Israel, Uzbekistan, Hungary, Palestine, Philippines, Panama, Yemen, Egypt, Netherlands, The Gambia, Canada, Jamaica, Moldova, Gambia, Grenada, Bolivia, Andorra, Madagascar, Turkey, Estonia, United States, Nigeria, Switzerland, Zimbabwe, Tunisia, Brunei, Luxembourg, China, Mexico, Pakistan, South Korea, Croatia, Russia, Kenya, Swaziland, Libya, Kuwait, Ukraine, East Timor, New Zealand. A well-built logistics network and a partnership network let us to conduct our goods anywhere in the globe on-time without damaging product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as to stay on the top.
To request or order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15407-2 |
Working pressure min./max. | -0,95 ... 16 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -5 ... 50 °C |
Medium | Compressed air |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |