We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
2631301070
Description
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
Subbase | Polyamide fiber-glass reinforced |
Protection class | IP69K |
Compressed air connection output | Ø 8 |
Type | 2 push-in fittings |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 2631301070, catch up with FAMAGA, the world's chief supplier of industrialized equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of outcomes and special attention to each client. We cherish everyone, who cooperated with us - therefore, our regular consumers accept the most helpful purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4000 such consumers, and we constantly make new agreements. More than 750 contracts are concluded per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Poland, Moldova, Afghanistan, Angola, Mexico, Romania, Tanzania, Lebanon, Kiribati, Central African Republic, Czech Republic, Azerbaijan, Andorra, Liberia, Eswatini, South Korea, El Salvador, Guyana, Iceland, Togo, Australia, Dominica, Greece, Israel, Pakistan, Nigeria, Ecuador, Panama, Uruguay, Mali, Zambia, Turkey, Slovakia, Kazakhstan, Norway, Malta, Luxembourg, Uganda, Brunei, Bangladesh, Serbia, Antigua and Barbuda, Costa Rica. A well-elaborated logistics network and a partnership network cheer us to send our products anywhere in the earth with no delay without discrediting product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this number is ascending every day. We are happy that clients choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or send a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Medium | Compressed air |
Protection class | IP69K |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Polyamide fiber-glass reinforced |
Seal | Hydrogenated acrylonitrile butadiene rubber |