We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480668789
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M4 |
Standardization | ISO 21287 |
Stroke | 15 mm |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480668789, call FAMAGA, the world's influential producer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and personalseparate attention to each purchaser. We value everyone, who joined with us - hence, our regular buyers get the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly sign new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Niger, San Marino, Oman, Italy, Colombia, Bulgaria, Monaco, Tajikistan, Sierra Leone, South Korea, Bhutan, Nicaragua, Zimbabwe, Brazil, East Timor, Sweden, United Arab Emirates, Armenia, South Sudan, Samoa, Japan, Croatia, Eritrea, China, Switzerland, Nepal, Benin, Libya, Cape Verde, Mauritania, Bolivia, Moldova, Panama, Albania, El Salvador, Tonga, Madagascar, Kazakhstan, Georgia, Uganda, The Gambia, Kyrgyzstan, Egypt, Swaziland, Peru, Macedonia, Botswana, Syria, Mozambique, Israel. A well-elaborated logistics network and a partnership network allow us to send our products anywhere in the world immediately without discrediting product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is growing every day. We are proud that buyers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as stay in control.
To inquire or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyurethane |