We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637936
Description
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Piston rod thread | M10 |
Standardization | ISO 15524 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480637936, contact FAMAGA, the world's central company of streamlined equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of goods and particular attention to each customer. We appreciate everyone, who cooperated with us - hence, our regular purchasers receive the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such consumers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Brazil, Kazakhstan, Libya, Thailand, Latvia, New Zealand, Burkina Faso, North Korea, Gambia, Mauritania, Guatemala, Malawi, Central African Republic, Philippines, Turkey, Bosnia and Herzegovina, Belize, Nicaragua, Seychelles, Norway, Tunisia, Estonia, Burundi, Kiribati, Azerbaijan, United Arab Emirates, Bangladesh, Liechtenstein, Slovakia, Algeria, Bulgaria, Equatorial Guinea, Moldova, Lithuania, Mexico, Macedonia, Denmark, Mongolia, Nepal, Chile, Niger. A advanced logistics chains and a partnership network allow us to conduct our items anywhere in the planet with no delay without damaging product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To get some advice or book, contact us or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Please note that this variant does not use a scraper. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |