We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822331404
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 80 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822331404, get in touch with FAMAGA, the world's foremost vendor of industrialized equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of goods and special attention to each orderer. We cherish everyone, who liased with us - so, our regular clients accept the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Austria, Central African Republic, Australia, Italy, Iraq, Honduras, Dominica, Myanmar, Brunei, India, Madagascar, Afghanistan, Burundi, Grenada, Djibouti, Algeria, Ecuador, Eswatini, Malaysia, Nepal, Zambia, Ukraine, Ireland, Tanzania, Namibia, Andorra, Peru, Belize, Tonga, Ghana, Sudan, Cameroon, Paraguay, Israel, Suriname, Mali, Iceland, Slovakia, Tajikistan, Montenegro, Kazakhstan. A well-shaped logistics link and a partnership network cheer us to conduct our items anywhere in the globe as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is rising every day. We are pleased that users choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or book, contact us or write to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |