We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5894675280
Description
Return type | With spring return |
Switching principle | 3/2 |
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 750 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 8x1 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5894675280, connect FAMAGA, the world's major provider of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and special attention to each user. We praise everyone, who collaborated with us - hence, our regular consumers receive the most beneficial purchase forms and discounts on the factory-made equipment market. At this time, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Netherlands, Romania, Monaco, El Salvador, Malaysia, Lesotho, United Arab Emirates, Mongolia, South Sudan, Ecuador, Cape Verde, Dominica, The Gambia, Samoa, Uruguay, Iceland, Burkina Faso, Yemen, Ghana, Zimbabwe, Jordan, Morocco, Fiji, Swaziland, Turkmenistan, Indonesia, Algeria, South Korea, Madagascar, Togo, Ukraine, Argentina, Mexico, Kenya, Cyprus, Pakistan, Angola, Mauritius, Qatar, Poland, Serbia, Nigeria. A well-elaborated logistics series and a partnership network let us to send our products anywhere in the globe on-time without compromising product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To request or order, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 3 ... 10 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. Working pressure with vacuum operation, connection 1: min. 3 bar , connection 3: min. - 0.95 bar The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |