We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
5218535110 (RDC-SA-052,5-0040) AVENTICS - Membran- und Kolbenzylinder, Serie RDC
Part number
5218535110
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5218535110 (RDC-SA-052,5-0040) AVENTICS - Membran- und Kolbenzylinder, Serie RDC 5218535110, communicate with FAMAGA, the world's chief producer of industrial equipment. Our company has lasted for more than ten years - these are years of experience, which are represented in the quality of products and individual attention to each customer. We cherish everyone, who worked with us - so, our regular clients bring in the most helpful purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4500 such clients, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Andorra, Dominican Republic, Macedonia, Laos, Monaco, Mali, Poland, Romania, Kenya, Bolivia, Saudi Arabia, Chile, Eritrea, India, Paraguay, Liberia, Chad, South Korea, Australia, Malawi, Haiti, Cameroon, China, Liechtenstein, Norway, Uzbekistan, Sierra Leone, North Korea, New Zealand, Iraq, Brazil, Ireland, Madagascar, Sudan, United States, Lithuania, Austria, Kiribati, United Arab Emirates, Zambia, Uruguay, Rwanda, Burkina Faso. A advanced logistics link and a partnership network cheer us to conduct our products anywhere in the earth as soon as possible without compromising product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are glad that customers choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To consult or make a request, phone us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Steel |
Piston rod | Stainless steel |
Piston | Aluminum |
Front cover | Aluminum, chrome-plated |
End cover | Aluminum, chrome-plated |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |