We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480158304
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 250 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R480158304, contact FAMAGA, the world's chief vendor of industrial equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each orderer. We cherish everyone, who joined with us - so, our regular purchasers procure the most favorable purchase terms and discounts on the industrial equipment market. At this moment, there are more than 4500 such customers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Cyprus, Congo, Djibouti, Albania, Gambia, Botswana, Kyrgyzstan, Malawi, Bolivia, Ukraine, Netherlands, Belarus, Saudi Arabia, Cape Verde, Mexico, Monaco, Japan, Rwanda, Morocco, Eritrea, Iraq, Philippines, India, Fiji, Switzerland, Guyana, Tajikistan, Malaysia, Suriname, Zimbabwe, Guatemala, Brazil, Montenegro, Mauritius, Moldova, Samoa, Afghanistan, China, Tanzania, Finland, Sweden, Poland, Israel. A well-developed logistics network and a partnership network cheer us to deliver our products anywhere in the planet on-time without discrediting product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been provided, and this number is ascending every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, phone us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |