We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480627287
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 160 mm |
Piston rod thread | M36x2 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Acrylonitrile butadiene rubber |
Scraper | Acrylonitrile butadiene rubber |
ATEX optional | |
Compressed air connection | G 3/4 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R480627287, reach FAMAGA, the world's key vendor of manufacturing equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of products and special attention to each consumer. We admire everyone, who worked with us - thus, our regular buyers procure the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Côte d\'Ivoire, United Arab Emirates, Myanmar, Cape Verde, Samoa, United States, Libya, Chad, Djibouti, Kiribati, Monaco, South Korea, Liberia, Luxembourg, Guinea, Latvia, The Bahamas, Czech Republic, Sweden, Japan, Bosnia and Herzegovina, Malaysia, Nigeria, Russia, Togo, Fiji, Guyana, Cyprus, Dominica, Turkmenistan, Mauritania, Slovakia, Senegal, Haiti, Niger, Botswana, Madagascar, Estonia, Kenya, Pakistan, Syria, Seychelles, Kyrgyzstan. A well-built logistics link and a partnership network let us to dispatch our products anywhere in the world promptly without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically advanced industrial equipment so as stay in control.
To consult or place an order, call us by phone or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Acrylonitrile butadiene rubber |
Nut for piston rod | Steel, galvanized |
Scraper | Acrylonitrile butadiene rubber |
Tie-rods | Stainless steel |