We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300666
Description
| Activation | Mechanical |
| Parts | Pressure regulator |
| Relieving exhaust | with relieving air exhaust |
| Pressure gauge | with pressure gauge in hand wheel |
| Housing | Die cast zinc |
| Sealing material | Acrylonitrile butadiene rubber |
| suitable for ATEX | |
| Nominal flow Qn | 1350 l/min |
| Compressed air connection | G 1/4 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Aventics (brand of Emerson) 0821300666, contact FAMAGA, the world's the best provider of industrialized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are illustrated in the quality of products and personalseparate attention to each buyer. We esteem everyone, who joined with us - therefore, our regular consumers get the most favorable purchase conditions and discounts on the factory-made equipment market. Now, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, Nicaragua, Chile, Paraguay, Turkey, New Zealand, Lesotho, Bolivia, Czech Republic, Seychelles, Macedonia, Algeria, Togo, Antigua and Barbuda, Kazakhstan, Burundi, Cyprus, Malawi, Tajikistan, Jordan, Ukraine, Tanzania, Moldova, Afghanistan, Mongolia, Kyrgyzstan, Nigeria, Niger, Denmark, Cape Verde, Bangladesh, Syria, Kiribati, Cameroon, India, Dominica, Iran, Jamaica, Austria, South Korea, Thailand, China, Bosnia and Herzegovina, Zimbabwe. A well-elaborated logistics connection and a partnership network allow us to deliver our goods anywhere in the planet with no delay without discrediting product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write to the online chat on our site. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Parts | Pressure regulator |
| Mounting orientation | Any |
| Certificates | suitable for ATEX |
| Working pressure min./max. | 0,5 ... 16 bar |
| Ambient temperature min./max. | -10 ... 60 °C |
| Medium temperature min./max. | -10 ... 60 °C |
| Medium | Compressed air Neutral gases |
| Regulator type | Diaphragm-type pressure regulator Can be assembled into blocks |
| Regulator function | with relieving air exhaust |
| Adjustment range min./max. | See table |
| Pressure supply | single |
| Activation | Mechanical |
| Weight | 0,35 kg |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Relieving exhaust (≤ 0.3 bar over set pressure). With rear exhaust (> 3 bar ). A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
| Recommended pre-filtering | 5 µm |
| Material |
|---|
| Housing | Die cast zinc |
| Seals | Acrylonitrile butadiene rubber |
