We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0821300663
Description
| Activation | Mechanical |
| Parts | Pressure regulator |
| Relieving exhaust | with relieving air exhaust |
| Pressure gauge | with pressure gauge in hand wheel |
| Housing | Die cast zinc |
| Sealing material | Acrylonitrile butadiene rubber |
| suitable for ATEX | |
| Nominal flow Qn | 1350 l/min |
| Compressed air connection | G 1/8 |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Aventics (brand of Emerson) 0821300663, communicate with FAMAGA, the world's key producer of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of products and individual attention to each consumer. We cherish everyone, who conspired with us - thus, our regular buyers pick up the most flexible purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 3500 such buyers, and we constantly sign new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Azerbaijan, Burkina Faso, Afghanistan, Kuwait, Sweden, Dominican Republic, Macedonia, Comoros, Paraguay, China, Zimbabwe, Kiribati, Jamaica, Madagascar, The Gambia, Eswatini, Netherlands, Singapore, Djibouti, Switzerland, Guatemala, Ghana, Albania, Seychelles, Serbia, Mauritania, United Arab Emirates, Nigeria, Mauritius, Sudan, Cape Verde, Croatia, Estonia, Bangladesh, Morocco, Malta, Latvia, Kyrgyzstan, Nepal, Armenia, Georgia, Bosnia and Herzegovina. A well-developed logistics series and a partnership network assist us to conduct our goods anywhere in the earth with no delay without compromising product quality.
A particular source of honor for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this bulk is rising every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as stay in control.
To ask a question or make a request, contact us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Parts | Pressure regulator |
| Mounting orientation | Any |
| Certificates | suitable for ATEX |
| Working pressure min./max. | 0,5 ... 16 bar |
| Ambient temperature min./max. | -10 ... 60 °C |
| Medium temperature min./max. | -10 ... 60 °C |
| Medium | Compressed air Neutral gases |
| Regulator type | Diaphragm-type pressure regulator Can be assembled into blocks |
| Regulator function | with relieving air exhaust |
| Adjustment range min./max. | See table |
| Pressure supply | single |
| Activation | Mechanical |
| Weight | 0,35 kg |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Suitable for use in Ex zones 1, 2, 21, 22. Relieving exhaust (≤ 0.3 bar over set pressure). With rear exhaust (> 3 bar ). A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
| Recommended pre-filtering | 5 µm |
| Material |
|---|
| Housing | Die cast zinc |
| Seals | Acrylonitrile butadiene rubber |
