We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480644582
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 32 mm |
| Piston rod thread | M8 |
| Standardization | ISO 15524 |
| Stroke | 100 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R480644582, make contact with FAMAGA, the world's foremost vendor of factory-made equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of products and particular attention to each orderer. We praise everyone, who engaged with us - so, our regular customers obtain the most flexible purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Canada, Luxembourg, Samoa, Nicaragua, Swaziland, Mexico, Brunei, Indonesia, Panama, Burkina Faso, Switzerland, Austria, Angola, Togo, Vietnam, Monaco, Mongolia, Chad, Malaysia, Liberia, Armenia, Mauritius, Japan, Mozambique, Morocco, Turkey, Ireland, Yemen, United States, Ghana, Peru, Tunisia, Guatemala, Nigeria, Mauritania, North Korea, Georgia, Haiti, Dominica, Croatia, South Korea, Serbia, Iceland. A advanced logistics bond and a partnership network allow us to conduct our goods anywhere in the world quickly without compromising product quality.
A particular source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note the selection of fittings for strokes < 10 mm . |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
