We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Aventics (brand of Emerson) R480176715, call FAMAGA, the world's central company of industrialized equipment. Our company has operated for more than ten years - these are years of experience, which are depicted in the quality of products and individual attention to each client. We value everyone, who cooperated with us - hence, our regular purchasers pick up the most beneficial purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Vietnam, Brunei, Morocco, Peru, Bhutan, Bahamas, Ecuador, South Korea, Tajikistan, Congo, Seychelles, Oman, Botswana, Mexico, Netherlands, Philippines, Japan, Mozambique, Estonia, Turkey, India, Mauritania, Montenegro, United Arab Emirates, Cape Verde, Monaco, North Korea, Jamaica, East Timor, Cameroon, Syria, The Gambia, Swaziland, Moldova, Mauritius, Bulgaria, Haiti, Slovakia, United States, Albania, Armenia, Egypt, Jordan, Yemen, Senegal. A well-developed logistics connection and a partnership network guide us to deliver our products anywhere in the planet quickly without damaging product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as keep on top of it.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |