We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5796505680
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 6x1 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 5796505680, get in touch with FAMAGA, the world's the best supplier of industrial equipment. Our company has worked for more than ten years - these are years of experience, which are symbolized in the quality of products and special attention to each buyer. We cherish everyone, who cooperated with us - therefore, our regular consumers obtain the most helpful purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4500 such clients, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Brazil, South Africa, Romania, Myanmar, Paraguay, Croatia, China, Uganda, Liechtenstein, South Sudan, Equatorial Guinea, Bulgaria, Iraq, Denmark, Zambia, Sudan, Kyrgyzstan, South Korea, New Zealand, Liberia, Saudi Arabia, Moldova, Rwanda, Tanzania, Samoa, Laos, Albania, Iceland, Cyprus, Swaziland, Eswatini, Belize, Kenya, Morocco, Turkey, Georgia, Austria, Poland, Australia, Luxembourg, Malta. A well-shaped logistics system and a partnership network allow us to dispatch our products anywhere in the earth promptly without undermining product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is rising every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To request or book, call us by phone or write a message to the online chat on our site. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | Internal |
Sealing principle | Soft sealing |
Working pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | 520 l/min |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |