We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637934
Description
| Functional principle | Single-acting, retracted without pressure |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 40 mm |
| Piston rod thread | M8 |
| Standardization | ISO 15524 |
| Stroke | 10 mm |
| Sealing material | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Aventics (brand of Emerson) R480637934, contact FAMAGA, the world's primary vendor of manufacturing equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of products and particular attention to each consumer. We appreciate everyone, who conspired with us - so, our regular purchasers accept the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such customers, and we constantly compose new agreements. More than 600 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Bahamas, Slovenia, Azerbaijan, Switzerland, Burma, Serbia, Chile, Albania, Malawi, Djibouti, Armenia, Fiji, Mauritania, Ireland, Netherlands, North Korea, Nicaragua, Guyana, Samoa, Pakistan, South Sudan, Togo, The Gambia, Egypt, Guatemala, Tonga, Russia, Belize, Georgia, Syria, Tunisia, Morocco, Bosnia and Herzegovina, Burkina Faso, Poland, East Timor, Malaysia, Brunei, Madagascar, Angola, Mexico, Mozambique, Sweden, Finland, United Arab Emirates, Norway. A advanced logistics link and a partnership network let us to conduct our items anywhere in the earth quickly without damaging product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more developed and technologically advanced industrial equipment so as keep on top of it.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Please note that this variant does not use a scraper. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
