We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226721250
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 125 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5226721250, call FAMAGA, the world's influential producer of machine made equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of goods and personalseparate attention to each orderer. We praise everyone, who worked with us - thus, our regular consumers receive the most desirable purchase conditions and discounts on the factory-made equipment market. At present, there are more than 3500 such buyers, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Fiji, Tanzania, Lesotho, Botswana, Belize, Burkina Faso, Turkey, Poland, Tunisia, Ireland, Slovakia, United Arab Emirates, Yemen, Madagascar, Philippines, Iceland, Panama, Romania, Seychelles, Comoros, Vietnam, United States, Djibouti, Brunei, Indonesia, Mongolia, Switzerland, Guyana, Kenya, China, Angola, India, South Sudan, Cyprus, Kuwait, Morocco, Malta, Serbia, Zimbabwe, Costa Rica, Togo, Syria, Suriname, Croatia, Mozambique, Samoa, Mali. A well-developed logistics network and a partnership network allow us to send our goods anywhere in the earth on-time without disreputing product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of factory-made equipment.
All spare parts from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this amount is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To get some advice or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |