We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226634650
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 65 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 5226634650, communicate with FAMAGA, the world's key supplier of mechanized equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of merchandises and private attention to each buyer. We appreciate everyone, who cooperated with us - so, our regular purchasers obtain the most convenient purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4000 such buyers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Nicaragua, Niger, Brunei, France, Bosnia and Herzegovina, Belarus, Azerbaijan, Bhutan, Mozambique, Myanmar, Lebanon, Bulgaria, El Salvador, Tanzania, Libya, Syria, Montenegro, Qatar, Zambia, South Sudan, Belize, Senegal, Malawi, Australia, Tonga, Malaysia, East Timor, Turkey, Swaziland, New Zealand, Israel, Suriname, Slovakia, Ghana, India, Luxembourg, Comoros, Bangladesh, Guatemala, Moldova, Iran, Namibia, Samoa, Paraguay, Vietnam, Iraq, Tajikistan. A well-built logistics chains and a partnership network guide us to send our products anywhere in the world on-time without undermining product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as keep on top of it.
To request or book, phone us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |