We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822491104
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 25 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822491104, get in touch with FAMAGA, the world's central supplier of manufacturing equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each client. We cherish everyone, who collaborated with us - thus, our regular customers get the most desirable purchase terms and discounts on the manufacturing equipment market. Now, there are more than 4500 such consumers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Fiji, Slovakia, Yemen, Myanmar, Cambodia, Burkina Faso, Ecuador, Grenada, Seychelles, Palestine, Senegal, Angola, Norway, Paraguay, East Timor, Bulgaria, Cyprus, Lithuania, Burma, Russia, Burundi, Turkey, Saudi Arabia, New Zealand, Andorra, Qatar, Mauritius, Thailand, Kuwait, Uruguay, Rwanda, Sweden, Chile, Montenegro, Armenia, Serbia, Mexico, Sudan, Egypt, Brazil, Australia, Argentina, Pakistan, Austria, Switzerland, Sierra Leone, Antigua and Barbuda. A advanced logistics chains and a partnership network guide us to deliver our units anywhere in the globe on-time without undermining product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, get in touch with us or send a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |