We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637869
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Piston diameter | 40 mm |
| Piston rod thread | M8 |
| Standardization | ISO 15524 |
| Stroke | 25 mm |
| Sealing material | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Aventics (brand of Emerson) R480637869, communicate with FAMAGA, the world's leading producer of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are described in the quality of spare parts and personalseparate attention to each consumer. We cherish everyone, who cooperated with us - thus, our regular customers accept the most convenient purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such consumers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Malaysia, Kazakhstan, Mauritius, Chad, Indonesia, Andorra, Ecuador, Kuwait, Liberia, Sudan, United Arab Emirates, Laos, Australia, Guinea, Bangladesh, Estonia, Hungary, Cyprus, Equatorial Guinea, Burundi, Bosnia and Herzegovina, Armenia, Cape Verde, Algeria, Haiti, The Bahamas, Senegal, Turkmenistan, Ghana, Uganda, Argentina, Guatemala, Morocco, Antigua and Barbuda, Afghanistan, Paraguay, Sierra Leone, Czech Republic, South Korea, New Zealand, Albania, Eswatini, Norway. A well-elaborated logistics link and a partnership network guide us to send our goods anywhere in the world on-time without compromising product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To inquire or book, contact us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Note the selection of fittings for strokes < 10 mm . |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
