We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
1825503594
Description
Number of valve positions | 4 |
Subbase | Aluminum |
Compressed air connection input | G 1/8 |
Compressed air connection output | M5 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 1825503594, contact FAMAGA, the world's primary supplier of industrialized equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each orderer. We esteem everyone, who cooperated with us - hence, our regular buyers receive the most desirable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, Angola, Equatorial Guinea, Jamaica, Estonia, Canada, Afghanistan, Panama, Haiti, Kuwait, Latvia, Bosnia and Herzegovina, Japan, Netherlands, Malaysia, Burkina Faso, Iraq, Chile, Morocco, Nicaragua, Albania, Serbia, Comoros, Montenegro, Czech Republic, Djibouti, Brunei, Poland, Sweden, United States, Benin, Thailand, Botswana, Samoa, Mexico, Switzerland, Tajikistan, Tunisia. A well-built logistics network and a partnership network help us to send our products anywhere in the planet quickly without damaging product quality.
A special source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are happy that users choose FAMAGA again and again, and we are glad to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To consult or order, get in touch with us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Single plug-in wiring |
Working pressure min./max. | 0 ... 10 bar |
Medium | Compressed air |
Grid dimension | 23 mm |
Direction of pneumatic port (2,4) | On the side |
Exhaust (3,5) | With directional exhaust (3/5) |
Mounting screw | M3 |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |