We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226634300
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 25 mm |
| Piston rod thread | M10x1,25 |
| Standardization | ISO 6432 |
| Stroke | 30 mm |
| Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Aventics (brand of Emerson) 5226634300, call FAMAGA, the world's leading company of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of outputs and particular attention to each client. We value everyone, who worked with us - therefore, our regular consumers bring in the most acceptable purchase terms and discounts on the machine made streamlined equipment market. Now, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the globe Germany, United Kingdom, Haiti, Malta, Iceland, Ghana, Tanzania, Sierra Leone, Australia, Montenegro, Myanmar, Gambia, Liberia, Andorra, Rwanda, Tajikistan, Bhutan, Burkina Faso, Uruguay, Azerbaijan, Lithuania, Laos, Austria, Brunei, Comoros, India, Turkey, Czech Republic, Uganda, Brazil, Moldova, Nepal, Argentina, Mali, Kazakhstan, Ukraine, Antigua and Barbuda, Philippines. A well-shaped logistics bond and a partnership network guide us to dispatch our goods anywhere in the earth with no delay without undermining product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To consult or order, contact us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
| Standards | ISO 6432 |
| Compressed air connection | Internal thread |
| Working pressure min./max. | 1 ... 10 bar |
| Ambient temperature min./max. | -25 ... 80 °C |
| Medium temperature min./max. | -25 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| Weight | See table |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Clamping piece for magnetic field sensor necessary |
| Material |
|---|
| Cylinder tube | Stainless steel |
| Piston rod | Stainless steel |
| Piston | Brass, Aluminum |
| Front cover | Aluminum, anodized |
| End cover | Aluminum, anodized |
| Seal | Acrylonitrile butadiene rubber Polyurethane |
| Nut for cylinder mounting | Steel, galvanized |
| Nut for piston rod | Steel, galvanized |
| Scraper | Polyurethane |
