We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226720250
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 5226720250, catch up with FAMAGA, the world's key producer of industrial equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of outcomes and individual attention to each consumer. We respect everyone, who cooperated with us - thus, our regular buyers obtain the most beneficial purchase terms and discounts on the machine made streamlined equipment market. Today, there are more than 4500 such customers, and we constantly sign new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the globe Germany, United Kingdom, Mauritius, Belgium, Italy, Netherlands, Andorra, Lesotho, Burma, Nicaragua, Indonesia, Egypt, The Bahamas, Eswatini, Angola, Madagascar, Zimbabwe, United Arab Emirates, Laos, Croatia, Poland, Vietnam, Ireland, Kuwait, Namibia, Philippines, Serbia, Jamaica, Zambia, Cyprus, United States, Bolivia, Niger, Switzerland, Samoa, El Salvador, Tunisia, Belarus, Greece, Afghanistan, Armenia, Seychelles, Cape Verde, Kiribati, Mauritania, Malta, Dominica, Sudan. A well-elaborated logistics system and a partnership network let us to send our items anywhere in the planet with no delay without discrediting product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or order, contact us or send a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders can be generated in the Internet configurator. ATEX ID: II 2G c IIB T4 II 2D c IP65 T125°C X The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |