We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822392002
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822392002, get in touch with FAMAGA, the world's prime distributor of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of spare parts and individual attention to each user. We admire everyone, who conspired with us - thus, our regular customers accept the most flexible purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 3500 such customers, and we constantly compose new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Croatia, Mongolia, United States, Senegal, Macedonia, Bahamas, Zambia, Belarus, Malawi, Thailand, Seychelles, Tunisia, Luxembourg, Denmark, Kuwait, Sierra Leone, Madagascar, Belize, Nepal, Bolivia, The Bahamas, Latvia, Haiti, Afghanistan, Bosnia and Herzegovina, Yemen, Ecuador, Suriname, The Gambia, Morocco, Liechtenstein, Mozambique, Austria, Malaysia, Russia, Djibouti, Sudan, Ukraine, East Timor, Uganda, Panama, Ghana, Egypt, Burkina Faso. A advanced logistics connection and a partnership network let us to conduct our elements anywhere in the earth promptly without undermining product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To consult or book, contact us or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |