We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822066102
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Stroke | 75 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822066102, connect FAMAGA, the world's main provider of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of merchandises and personalseparate attention to each buyer. We appreciate everyone, who conspired with us - therefore, our regular consumers accept the most acceptable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly sign new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Russia, Israel, Morocco, Algeria, Burma, Indonesia, Liechtenstein, Eswatini, Sweden, Myanmar, Estonia, Ecuador, Malawi, Mauritania, Iran, Seychelles, Azerbaijan, United States, Vietnam, Ghana, Cape Verde, Mongolia, Tonga, Benin, Niger, Kenya, Pakistan, Jordan, Malta, Rwanda, Argentina, Bulgaria, Madagascar, Zambia, Laos, Libya, Norway, Bosnia and Herzegovina, Philippines. A well-elaborated logistics connection and a partnership network let us to deliver our goods anywhere in the world promptly without discrediting product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, get in touch with us or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |