We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822490104
Description
| Piston rod modification | Optionally heat-resistant |
| Functional principle | Single-acting, extended without pressure |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 16 mm |
| Piston rod thread | M4 |
| Standardization | NFE 49004 |
| Stroke | 25 mm |
| Sealing material | Nitrile butadiene rubber |
| Compressed air connection | M5 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Aventics (brand of Emerson) 0822490104, get in touch with FAMAGA, the world's primary retailer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of spare parts and individual attention to each customer. We respect everyone, who liased with us - therefore, our regular buyers receive the most helpful purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such buyers, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Cape Verde, Uganda, Myanmar, Cambodia, Cameroon, Portugal, Macedonia, Moldova, Grenada, Mozambique, India, Andorra, Suriname, Costa Rica, Kiribati, Swaziland, Guatemala, Malawi, Saudi Arabia, Poland, Paraguay, Mali, Yemen, Australia, Slovakia, Indonesia, Lithuania, Bangladesh, Turkey, Burundi, Kazakhstan, Austria, Algeria, Niger, Iceland, Finland. A well-developed logistics series and a partnership network allow us to conduct our goods anywhere in the globe on-time without compromising product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this number is rising every day. We are pleased that users choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To ask a question or book, get in touch with us or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Standards | NFE 49004 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 5 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| Scraper | Polyurethane |
