We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422102504
Description
Actuating control | single solenoid |
Return type | With air spring return |
Switching principle | 5/2 |
Version | Spool valve, positive overlapping |
Housing | Polyamide fiber-glass reinforced |
Sealing material | Acrylonitrile butadiene rubber,Hydrogenated acrylonitrile butadiene rubber |
Protection class | IP65 |
Nominal flow Qn | 300 l/min |
DC operating voltage | 24 V |
Activation | Electrically |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R422102504, connect FAMAGA, the world's primary provider of industrial equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of spare parts and personalseparate attention to each purchaser. We esteem everyone, who collaborated with us - so, our regular clients get the most convenient purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the globe Germany, United Kingdom, Gabon, Moldova, Sri Lanka, Monaco, Singapore, Djibouti, Eritrea, Botswana, Mexico, El Salvador, Bahamas, Iran, United States, Luxembourg, Honduras, Japan, Benin, Iraq, Oman, Kazakhstan, Angola, Thailand, Suriname, Mozambique, Algeria, Uzbekistan, Madagascar, Sudan, South Korea, The Gambia, Haiti, Vietnam, Dominica, Sweden, Cyprus, Latvia, Egypt, Israel. A well-developed logistics connection and a partnership network assist us to conduct our goods anywhere in the globe as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To get some advice or book, phone us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Spool valve, positive overlapping |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Blocking principle | Base plate principle, multiple |
Working pressure min./max. | -0,9 ... 10 bar |
Control pressure min./max. | 3 ... 8 bar |
Ambient temperature min./max. | -10 ... 60 °C |
Medium temperature min./max. | -10 ... 60 °C |
Medium | Compressed air |
Max. particle size | 40 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Nominal flow Qn | 300 l/min |
Pilot control exhaust | with directional pilot air exhaust |
Protection class with connection | IP65 |
Protective circuit | Z-diode |
Reverse polarity protection | Protected against polarity reversal |
LED status display | Yellow |
Duty cycle | 100 % |
mounting screws | Hexalobular socket (TORX) ISO 10664-8 |
Mounting screw tightening torque | 0,5 Nm |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The pilot type (external/internal) is not implemented in the valve, but in the end plate of the valve system. |
Material |
---|
Housing | Polyamide fiber-glass reinforced |
Seals | Acrylonitrile butadiene rubber Hydrogenated acrylonitrile butadiene rubber |
Front plate | Polyamide fiber-glass reinforced |
End plate | Polyamide |