We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480170784
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 125 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480170784, make contact with FAMAGA, the world's major distributor of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each buyer. We respect everyone, who conspired with us - so, our regular clients bring in the most desirable purchase forms and discounts on the machine made streamlined equipment market. Today, there are more than 3500 such customers, and we constantly form new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Dominica, Nigeria, Saudi Arabia, Australia, Turkey, Netherlands, Belgium, Palestine, Singapore, New Zealand, Andorra, Tanzania, The Bahamas, Guinea, Iran, Cape Verde, Tunisia, Rwanda, Macedonia, Israel, Algeria, Niger, Laos, Paraguay, Greece, Yemen, Hungary, Sudan, Ghana, Turkmenistan, Senegal, Kyrgyzstan, Latvia, Zambia, Antigua and Barbuda, Benin, Denmark, Eswatini, Moldova, Cameroon, Bangladesh, Sierra Leone. A well-elaborated logistics chains and a partnership network let us to deliver our products anywhere in the earth promptly without disreputing product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this amount is growing every day. We are glad that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or order, phone us or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |