We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822034204
Description
Functional principle | double-acting |
Cushioning | elastic |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 80 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822034204, contact FAMAGA, the world's prime company of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are depicted in the quality of products and special attention to each orderer. We cherish everyone, who conspired with us - thus, our regular consumers pick up the most desirable purchase conditions and discounts on the manufacturing equipment market. Today, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA supplies all over the globe Germany, United Kingdom, South Sudan, Sweden, Finland, Italy, Azerbaijan, Lithuania, China, Djibouti, Georgia, Afghanistan, Indonesia, Luxembourg, Guinea, Liechtenstein, New Zealand, Poland, Uzbekistan, Kuwait, Guyana, Estonia, Monaco, East Timor, Tunisia, Haiti, Russia, Mongolia, Cyprus, Switzerland, Namibia, Philippines, United Arab Emirates, Mauritius, South Korea, Bosnia and Herzegovina, Latvia, Madagascar, The Gambia, Mozambique, United States, Hungary. A well-elaborated logistics connection and a partnership network allow us to send our goods anywhere in the earth on-time without discrediting product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or place an order, contact us or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |