We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412006235
Description
Parts | Standard oil-mist lubricator |
Type of filling | Semi-automatic oil filling during operation,Manual oil filling |
inspection glass | with window |
Housing | Polyamide |
Reservoir | Die cast zinc |
Sealing material | Acrylonitrile butadiene rubber |
suitable for ATEX | |
Nominal flow Qn | 3100 l/min |
Compressed air connection | G 3/8 |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412006235, catch up with FAMAGA, the world's chief distributor of manufacturing equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and individual attention to each client. We admire everyone, who conspired with us - thus, our regular purchasers procure the most convenient purchase conditions and discounts on the industrial equipment market. At present, there are more than 4500 such purchasers, and we constantly make new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Philippines, Zimbabwe, Guatemala, Honduras, Cameroon, Lesotho, Niger, Finland, Albania, Panama, Kuwait, Papua New Guinea, Suriname, Botswana, Gambia, Tunisia, Algeria, Madagascar, Jordan, East Timor, The Gambia, Liberia, Pakistan, Japan, Eswatini, Nicaragua, Argentina, Djibouti, Luxembourg, Hungary, Vietnam, Cape Verde, El Salvador, Latvia, Croatia, Nepal, Morocco, Cyprus, Indonesia, South Korea, Austria. A advanced logistics system and a partnership network help us to ship our items anywhere in the globe immediately without compromising product quality.
A special source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this bulk is ascending every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or write to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Version | Oil-mist lubricator, Can be assembled into blocks |
Parts | Standard oil-mist lubricator |
Mounting orientation | vertical |
Certificates | suitable for ATEX |
Working pressure min./max. | 0,5 ... 16 bar |
Ambient temperature min./max. | -10 ... 50 °C |
Medium temperature min./max. | -10 ... 50 °C |
Medium | Compressed air Neutral gases |
Lubricator reservoir volume | 40 cm³ |
Type of filling | Semi-automatic oil filling during operation Manual oil filling |
Weight | 0,229 kg |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Electrical level detection only with ST6 sensor with reed contact, sensor holder included in the scope of the delivery. Sensor not included in scope of delivery, sensor installation prepared. The entire preset drip quantity enters the pressure system. Manual oil filling possible during operation at a maximum operating pressure of 10 bar. Suitable for use in Ex zones 1, 2, 21, 22. Note: Polycarbonate reservoirs are susceptible to solvents, supplementary information can be found at "Customer information". A change in the flow direction (from air supply on the left to air supply on the right) occurs by rotating installation by 180° about the vertical axis. Please see the operating instructions for further details. | |
Oil dosing at 1000 l/min | 1-2 drops |
Material |
---|
Housing | Polyamide |
Front plate | Acrylonitrile butadiene styrene |
Seals | Acrylonitrile butadiene rubber |
Threaded bushing | Die cast zinc |
Reservoir | Polycarbonate Die cast zinc |
Protective guard | Polyamide |