We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334202
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
Expected within 5 days
If you are seeking Aventics (brand of Emerson) 0822334202, contact FAMAGA, the world's major supplier of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of goods and individual attention to each customer. We respect everyone, who engaged with us - so, our regular clients bring in the most desirable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Spain, Kenya, Niger, Senegal, Cuba, Portugal, United Arab Emirates, Algeria, Malta, Uzbekistan, Finland, Honduras, Fiji, Libya, Dominica, Paraguay, Russia, Bangladesh, Antigua and Barbuda, The Bahamas, Egypt, India, Ecuador, Cape Verde, Namibia, Kiribati, Comoros, Iran, Hungary, Nepal, Argentina, El Salvador, Iceland, Angola, Moldova, Norway, Togo, Israel, Vietnam, Cameroon, Tanzania. A well-elaborated logistics network and a partnership network help us to conduct our goods anywhere in the globe as soon as possible without undermining product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the field of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |