We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001593
Description
Piston rod modification | through |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001593, reach FAMAGA, the world's top distributor of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and private attention to each consumer. We value everyone, who conspired with us - so, our regular buyers get the most convenient purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the globe Germany, United Kingdom, Sweden, Palestine, Cuba, Nigeria, Cape Verde, Uzbekistan, Australia, Ukraine, Indonesia, Belarus, Liberia, Qatar, Ecuador, Colombia, Lithuania, Rwanda, China, Jamaica, Czech Republic, Iceland, Afghanistan, Chile, Guyana, Russia, Mauritius, Mozambique, Equatorial Guinea, Azerbaijan, East Timor, United Arab Emirates, El Salvador, Mongolia, Malaysia, Albania, The Gambia, Denmark, Libya, Zimbabwe, Paraguay, North Korea, Suriname, Uganda, Bolivia, New Zealand, Madagascar, Morocco. A well-built logistics bond and a partnership network cheer us to conduct our elements anywhere in the globe on-time without damaging product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are pleased that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To request or order, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |