We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001662
Description
Piston rod modification | through |
Functional principle | Single-acting, retracted without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6x1 |
Standardization | ISO 21287 |
Stroke | 15 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R422001662, make contact with FAMAGA, the world's foremost company of manufacturing equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of goods and private attention to each consumer. We respect everyone, who engaged with us - so, our regular buyers obtain the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 3500 such customers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Costa Rica, Bhutan, Honduras, Lithuania, Albania, Belize, Bangladesh, Nigeria, Nepal, Seychelles, Azerbaijan, Switzerland, Tunisia, Romania, Slovenia, Moldova, Austria, Peru, Cyprus, Ghana, Greece, Yemen, Czech Republic, El Salvador, Jamaica, Saudi Arabia, Latvia, Japan, Antigua and Barbuda, Tajikistan, Djibouti, Philippines, Mali, Vietnam, Benin, Malaysia, Ukraine, Montenegro, Angola, Bulgaria, Tanzania, Mauritius, Iraq, Estonia, Sudan, Kuwait, East Timor. A well-built logistics bond and a partnership network allow us to deliver our products anywhere in the globe promptly without damaging product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as stay in control.
To consult or book, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with external thread extension, dimension "A" is increased by the value of the thread extension. With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. Piston Ø 50/63, stroke < 5 mm: AF= 11 mm Piston Ø 80/100, stroke < 5 mm: AF= 15 mm |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |