We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5794625280
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 600 l/min |
Compressed air connection input | Ø 8x1 |
Compressed air connection output | Ø 8x1 |
Operational voltage AC at 50 Hz | 230 V |
Operational voltage AC at 60 Hz | 230 V |
Activation | Electrically |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5794625280, connect FAMAGA, the world's foremost producer of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are outlined in the quality of outputs and personalseparate attention to each customer. We praise everyone, who worked with us - thus, our regular buyers get the most beneficial purchase terms and discounts on the factory-made equipment market. At this time, there are more than 3500 such customers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, San Marino, Gambia, Netherlands, Brazil, United States, Malta, Bosnia and Herzegovina, Greece, East Timor, Cuba, Indonesia, Tunisia, Estonia, Denmark, Guyana, Romania, Israel, Turkey, Benin, Togo, Iran, Niger, Sweden, Montenegro, Croatia, Panama, Liechtenstein, Kuwait, Andorra, South Sudan, Peru, United Arab Emirates, Slovakia, Cape Verde, Belarus, Switzerland, Iceland, Australia, Malaysia, New Zealand, India, Angola, Jamaica, Samoa, The Gambia, Syria, Antigua and Barbuda. A well-developed logistics link and a partnership network let us to deliver our units anywhere in the globe on-time without undermining product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, contact us or write to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |