We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5794420210
Description
Version | Poppet valve |
Housing | Polyamide |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Protection class | IP65 |
Port size | ISO 15217, form C |
Type | Plug |
Nominal flow Qn | 520 l/min |
Compressed air connection input | Ø 6x1 |
Compressed air connection output | Ø 6x1 |
DC operating voltage | 12 V |
Activation | Electrically |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 5794420210, communicate with FAMAGA, the world's foremost company of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are outlined in the quality of outputs and private attention to each orderer. We appreciate everyone, who collaborated with us - thus, our regular customers accept the most acceptable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 3500 such customers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Portugal, Fiji, Uzbekistan, Belarus, Slovakia, Cyprus, France, United States, Iraq, Belgium, Thailand, Malaysia, Laos, Switzerland, Ecuador, Liberia, Seychelles, Morocco, Niger, Armenia, Sweden, Burkina Faso, Sudan, Swaziland, Denmark, Kenya, El Salvador, Uruguay, Vietnam, Jordan, Greece, Ukraine, South Korea, Mongolia, Kyrgyzstan, Kiribati, Finland, Dominica, Eswatini, Syria, Serbia, Cameroon, Tonga, Argentina, Malta, Algeria, Croatia. A well-shaped logistics chains and a partnership network let us to deliver our goods anywhere in the earth immediately without damaging product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is ascending every day. We are proud that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as to stay on the top.
To ask a question or make a request, call us by phone or write to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Poppet valve |
Activation | Electrically |
Pilot | External |
Sealing principle | Soft sealing |
Working pressure min./max. | 0,5 ... 8 bar |
Control pressure min./max. | 2 ... 8 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -15 ... 50 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 1 mg/m³ |
Nominal flow Qn | See table |
Protection class with connection | IP65 |
Reverse polarity protection | Protected against polarity reversal |
Duty cycle | 100 % |
Typ. switch-on time | 18 ms |
Typ. switch-off time | 16 ms |
Weight | 0,093 kg |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
At an ambient temperature of 40 °C the max. working pressure is 10 bar . Versions with voltage of less than 50 V DC do not have a protective ground. The control pressure must be at least as high as the working pressure. |
Material |
---|
Housing | Polyamide |
Seals | Acrylonitrile butadiene rubber Polyurethane |