We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822334201
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 6432 |
Stroke | 10 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822334201, call FAMAGA, the world's influential retailer of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of products and individual attention to each purchaser. We understand everyone, who conspired with us - hence, our regular customers procure the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such buyers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA works all over the globe Germany, United Kingdom, Grenada, Senegal, Madagascar, Guinea-Bissau, Fiji, Algeria, Switzerland, Guyana, Pakistan, Djibouti, Sudan, Netherlands, Papua New Guinea, Benin, Afghanistan, Ireland, Albania, Romania, Cameroon, Japan, Botswana, Mauritania, Panama, Egypt, Finland, Haiti, Saudi Arabia, South Korea, Iran, Guatemala, Mozambique, Bosnia and Herzegovina, Morocco, North Korea, Nicaragua, Cape Verde, Jamaica, Iceland, El Salvador, Latvia, Seychelles, Zimbabwe, Mexico, Indonesia, Qatar, Dominica, Mauritius, China, Syria, Swaziland, Bangladesh. A well-built logistics series and a partnership network cheer us to deliver our items anywhere in the world quickly without compromising product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or order, contact us or write to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |