We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822390208
Description
Piston rod modification | Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M8 |
Standardization | NFE 49004 |
Stroke | 60 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822390208, make contact with FAMAGA, the world's leading supplier of manufacturing equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of goods and individual attention to each client. We value everyone, who cooperated with us - therefore, our regular customers pick up the most favorable purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such customers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Burma, Greece, Nigeria, South Africa, Fiji, Iraq, Mali, South Sudan, Moldova, Bosnia and Herzegovina, Singapore, Hungary, Syria, Iran, Cape Verde, Czech Republic, Ecuador, Antigua and Barbuda, Mozambique, Peru, Montenegro, Cameroon, Australia, Monaco, Senegal, Liechtenstein, Uganda, Cyprus, Lithuania, Poland, Zambia, Paraguay, United States, Belize, Tajikistan, Armenia, Burundi, Malta, Egypt, Kiribati, Kazakhstan, Iceland, Ukraine, Albania. A advanced logistics network and a partnership network allow us to conduct our products anywhere in the planet as soon as possible without undermining product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is growing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more developed and technologically developed industrial equipment so as not to lower the bar.
To consult or book, call us by phone or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. LW*/SW* Hexagonal key required |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |