Aventics (brand of Emerson) 0822333204
  Aventics (brand of Emerson) 0822333204

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822333204 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822333204

Description

Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 20 mm
Piston rod thread M8
Standardization ISO 6432
Stroke 80 mm
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822333204

If you are pursuing Aventics (brand of Emerson) 0822333204, get in touch with FAMAGA, the world's major company of mechanized equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each customer. We value everyone, who engaged with us - so, our regular purchasers bring in the most desirable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the world . A advanced logistics network and a partnership network cheer us to ship our items anywhere in the globe as soon as possible without damaging product quality.

A particular source of good name for FAMAGA is its workers, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of industrial equipment.

All outcomes from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is growing every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as not to lower the bar.

To inquire or book, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features 0822333204

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
Clamping piece for magnetic field sensor necessary
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Brass, Aluminum
Front cover Aluminum, anodized
End cover Aluminum, anodized
Seal Acrylonitrile butadiene rubber Polyurethane
Nut for cylinder mounting Steel, galvanized
Nut for piston rod Steel, galvanized
Scraper Polyurethane