We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
5226621350
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 135 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 5226621350, call FAMAGA, the world's chief vendor of streamlined equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of goods and personalseparate attention to each client. We cherish everyone, who joined with us - thus, our regular buyers get the most desirable purchase conditions and discounts on the factory-made equipment market. At present, there are more than 4500 such buyers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Samoa, Poland, United Arab Emirates, Romania, Ireland, Seychelles, Russia, Djibouti, Liechtenstein, Japan, Tajikistan, Czech Republic, Bhutan, Guyana, Swaziland, Fiji, Saudi Arabia, Botswana, Malaysia, Peru, Philippines, Mali, Togo, Comoros, Guatemala, Sudan, Yemen, Antigua and Barbuda, Mauritius, Qatar, Ecuador, Burkina Faso, Slovakia, Kyrgyzstan, Latvia, Tonga, Iraq, Serbia, Sierra Leone, Syria, Cameroon. A well-developed logistics system and a partnership network help us to send our goods anywhere in the globe on-time without disreputing product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been provided, and this amount is ascending every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more exceptional and technologically innovative industrial equipment so as to stay on the top.
To request or order, contact us or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |