We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019815
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M4 |
Standardization | ISO 15524 |
Stroke | 50 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) R412019815, reach FAMAGA, the world's primary distributor of industrialized equipment. Our company has progressed for more than ten years - these are years of experience, which are represented in the quality of spare parts and special attention to each user. We admire everyone, who conspired with us - thus, our regular purchasers accept the most favorable purchase forms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the world Germany, United Kingdom, Mali, Czech Republic, Norway, Saudi Arabia, Niger, Paraguay, Burundi, India, South Sudan, Gambia, Lebanon, Comoros, Romania, Liechtenstein, Iran, Ecuador, Japan, Argentina, Andorra, Zambia, North Korea, Benin, Kiribati, Austria, Slovakia, Costa Rica, Thailand, Jamaica, Algeria, Denmark, El Salvador, Rwanda, Belarus, Seychelles, Montenegro, Cyprus, Tajikistan, Laos, Jordan, Sudan, Croatia. A well-developed logistics system and a partnership network allow us to dispatch our elements anywhere in the earth as soon as possible without damaging product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are pleased that users choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To ask a question or make a request, contact us or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |