We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822345902
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822345902, get in touch with FAMAGA, the world's principle producer of manufacturing equipment. Our company has existed for more than ten years - these are years of experience, which are illustrated in the quality of products and particular attention to each orderer. We esteem everyone, who collaborated with us - hence, our regular purchasers pick up the most favorable purchase conditions and discounts on the factory-made equipment market. At present, there are more than 4000 such clients, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Argentina, Bahamas, United States, Canada, Malta, Haiti, Cyprus, Jamaica, Yemen, Colombia, Thailand, Indonesia, Macedonia, Mozambique, Chile, Luxembourg, Turkey, East Timor, Israel, Zimbabwe, Uganda, Estonia, Armenia, Georgia, Djibouti, Kazakhstan, Burkina Faso, Gambia, Dominica, United Arab Emirates, El Salvador, Nigeria, Switzerland, Morocco, Nepal, Panama, Costa Rica, The Gambia, Guatemala, Cape Verde, Lithuania, Kuwait, Moldova, Pakistan, Poland. A well-elaborated logistics chains and a partnership network help us to ship our goods anywhere in the world as soon as possible without compromising product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that users choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.
To inquire or book, phone us or write to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed! |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Trunnion mounting | Nodular graphite iron, galvanized |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |