We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Name
1322001000 (ICM-DA-020-0012-0) AVENTICS - Minizylinder, Serie ICM
Part number
1322001000
Description
Minizylinder, Serie ICM ICM-DA-020-0012-0 Kolben-Ø20 mm Hub12 mm Wirkprinzipdoppeltwirkend Dämpfungelastische Dämpfung MagnetkolbenKolben ohne Magnet UmgebungsanforderungenIndustriestandard, lebensmitteltauglich Kolbenstangeeinseitig AbstreiferStandard Industrieabstreifer Druck zur Bestimmung der Kolbenkräfte6,3 bar Kolbenkraft einfahrend166 N Kolbenkraft ausfahrend198 N Umgebungstemperatur min.-20 °C Umgebungstemperatur max.70 °C Betriebsdruck min.2 bar Betriebsdruck max.10 bar AnschlüsseG 1/8 KolbenstangengewindeM8 Hub max.400 mm MediumDruckluft Mediumstemperatur min.-20 °C Mediumstemperatur max.70 °C Max. Partikelgröße50 µm Ölgehalt der Druckluft min.0 mg/m³
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 1322001000 (ICM-DA-020-0012-0) AVENTICS - Minizylinder, Serie ICM 1322001000, reach FAMAGA, the world's key producer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and private attention to each buyer. We admire everyone, who worked with us - therefore, our regular consumers get the most acceptable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4500 such customers, and we constantly sign new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Dominica, Singapore, Malawi, Uganda, Guatemala, Angola, Hungary, Moldova, Netherlands, Denmark, Uzbekistan, Chad, Mexico, Burma, Haiti, Bulgaria, Azerbaijan, Tajikistan, North Korea, Montenegro, Madagascar, Argentina, Austria, Ecuador, Sierra Leone, Estonia, Rwanda, Greece, Indonesia, Czech Republic, Tanzania, United Arab Emirates, Israel, Luxembourg, Namibia, Sudan, Ghana, Nepal, Kenya, Syria, New Zealand, Georgia. A well-elaborated logistics bond and a partnership network help us to deliver our goods anywhere in the world as soon as possible without disreputing product quality.
A particular source of pride for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To consult or place an order, call us by phone or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 70 °C |
Medium temperature min./max. | -20 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Nut MR3 included in supply |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Front cover | Polyoxymethylene |
End cover | Polyoxymethylene |
Connection thread | Stainless steel |
Seal | Acrylonitrile butadiene rubber |
Nut for cylinder mounting | Polyamide |
Nut for piston rod | Stainless steel |
Scraper | Polyurethane |