We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001493
Description
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M6 |
Standardization | ISO 21287 |
Stroke | 5 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001493, reach FAMAGA, the world's top vendor of industrial equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and special attention to each consumer. We value everyone, who joined with us - so, our regular customers get the most convenient purchase forms and discounts on the industrial equipment market. At present, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Netherlands, Ukraine, Djibouti, Equatorial Guinea, Namibia, Tajikistan, Singapore, East Timor, India, South Korea, Romania, Vietnam, Canada, Finland, Switzerland, Mauritania, Malta, Russia, Syria, Tonga, Samoa, Bulgaria, Turkmenistan, Suriname, Philippines, Belize, Mozambique, Kyrgyzstan, South Sudan, Senegal, Dominica, Iceland, Qatar, Togo, Comoros, Serbia, Cape Verde, Moldova. A well-elaborated logistics bond and a partnership network assist us to dispatch our products anywhere in the globe promptly without disreputing product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To get some advice or place an order, phone us or write a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |