We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
7471325104
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | CNOMO / NFE 49-001 |
Stroke | 150 mm |
Sealing material | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 7471325104, contact FAMAGA, the world's top retailer of factory-made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are portrayed in the quality of products and personalseparate attention to each user. We esteem everyone, who liased with us - thus, our regular buyers get the most acceptable purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Venezuela, Eswatini, United Arab Emirates, Saudi Arabia, Iraq, Tajikistan, South Sudan, Romania, Albania, Estonia, Bahamas, El Salvador, Guinea, Colombia, Belarus, Mauritius, Guatemala, Gambia, Costa Rica, Cyprus, Cameroon, Australia, Botswana, Madagascar, United States, Uruguay, Burundi, The Bahamas, Peru, Paraguay, Ireland, Nepal, Mauritania, Montenegro, Cape Verde, Latvia, Benin, South Korea, Sweden, Zimbabwe, Finland, Malta, Georgia, Togo. A well-developed logistics series and a partnership network cheer us to ship our goods anywhere in the earth immediately without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are glad that clients choose FAMAGA again and again, and we strive to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To inquire or order, contact us or send a message to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | CNOMO / NFE 49-001 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Optional heat-resistant variants are suitable for applications at temperatures up to 120 °C and do not have a magnetic piston. You will find the order key and all valid configurations (customer information) in the Media Centre. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Tie-rods | Stainless steel |