We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R422001502
Description
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M4 |
Standardization | ISO 21287 |
Stroke | 10 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R422001502, make contact with FAMAGA, the world's dominant retailer of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and personalseparate attention to each consumer. We esteem everyone, who engaged with us - thus, our regular consumers pick up the most convenient purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such customers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Venezuela, Rwanda, Eritrea, Vietnam, Switzerland, Seychelles, Cambodia, Dominican Republic, Georgia, Zambia, Ireland, Paraguay, Malawi, Cyprus, Fiji, Guyana, Singapore, Dominica, Qatar, Cape Verde, Russia, Samoa, Zimbabwe, Indonesia, Netherlands, Swaziland, Jordan, Monaco, Serbia, Togo, Poland, Turkmenistan, Malaysia, Mauritius, Tunisia, Latvia, Ghana, Philippines, Uganda, El Salvador, Brazil, Estonia, Botswana, Sweden, Burkina Faso, Mauritania, Bulgaria. A advanced logistics network and a partnership network allow us to dispatch our goods anywhere in the world as soon as possible without damaging product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as stay in control.
To ask a question or book, phone us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 21287 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With cylinders with a piston rod extension, dimensions "WH" and "ZB" are increased by the value of the piston rod extension. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Polyurethane |
Scraper | Polyurethane |