We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822390002
Description
Piston rod modification | Optionally through |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M4 |
Standardization | NFE 49004 |
Stroke | 15 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
ATEX optional | |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822390002, make contact with FAMAGA, the world's central provider of industrial equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of outcomes and particular attention to each client. We praise everyone, who engaged with us - thus, our regular clients get the most desirable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Thailand, The Gambia, Finland, Samoa, Morocco, Grenada, Netherlands, Togo, Israel, Afghanistan, Uruguay, Jordan, Serbia, Honduras, Cyprus, Malaysia, El Salvador, Malawi, Luxembourg, Ireland, United Arab Emirates, Poland, Russia, Mauritius, Zimbabwe, Kenya, Philippines, Mauritania, Botswana, Kuwait, Tonga, South Sudan, Estonia, Macedonia, Syria, Bangladesh, China, Georgia, Vietnam, Kazakhstan, Guatemala, Seychelles, Jamaica, Yemen, Indonesia, Equatorial Guinea. A well-shaped logistics system and a partnership network allow us to ship our goods anywhere in the planet with no delay without disreputing product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the range of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that buyers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To inquire or make a request, contact us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | NFE 49004 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |